Operator's Manual

Configuring the TM80/TM70 Maintenance Menu
TM80/TM70 Telemetry Monitor Operator’s Manual 13 - 13
3. Tap to exit the [Defaults] menu.
13.2.7 Transferring a Configuration
The TM80/TM70 is capable of configuring multiple devices through one export opera-
tion via a wireless interface.
To transfer the configuration from the TM80/TM70 to an external device:
1. In the [Maintenance] menu of an external device, tap [Defaults] → [Import
Device Settings] to enter the settings import mode.
2. In the [Maintenance] menu of the TM80/TM70 unit, tap [Defaults] → [Export
Device Settings] to enter the [Export Device Settings] menu.
The discovered external devices are listed in the [Export Device Settings] menu.
3. Select the desired external devices by tapping the check box.
4. Tap [Export] to start exporting the TM80’s configuration.
The selected external devices screen will shortly display the “Downloading device
settings” message.
■ On the external devices if an import is successful, the external device will display
the “Download complete.” message, and after 10 seconds return to the [Defaults]
Export Device Settings Copies the current settings to the external device.
Import Device Settings Copies the settings from the external device to the TM80/TM70 unit. Refer to
"Transferring a Configuration" on page 13 - 13 for details.
Restore Factory Defaults Allows an authorized user to reestablish the original database power up
settings to factory default values.
Options Description
* The factory default settings are in bold.
WARNING
• Do not power off the devices during the download process.
• Configurations can only be transferred between telemetry devices of
the same model. You cannot transfer configuration from TM80 to TM70,
or vice versa.