Operator's Manual

Maintenance Menu Configuring the TM80/TM70
13 - 12 TM80/TM70 Telemetry Monitor Operator’s Manual
13.2.5.6 EAP Certificate Management
You can import up to 10 certificates from a USB drive or delete certificates from the
TM80.
Importing Certificates
1. Insert a USB drive to the USB port of your computer.
2. Create the folder named “Cert” in the USB drive.
3. Copy the desired certificates to the “Cert” folder.
4. Remove the battery for the TM80’s battery compartment and find the MicroUSB
socket inside the battery compartment.
5. Connect the MicroUSB end of the USB upgrade cable (P/N; 009-00549-00) to the
MicroUSB socket. Insert the prepared upgrade USB drive on the USB female con-
nector of the upgrade cable, and connect the USB male connector of the upgrade
cable to the USB power adapter.
6. Power on the TM80.
7. Press to enter the main menu
→ tap [Maintenance]→ enter the required
password
→ tap [Network] → tap [EAP Certificate].
8. Tap [USB] and then select the desired certificate.
9. Tap [Import].
Deleting Certificates
1. Press to enter the main menu
→ tap [Maintenance]→ enter the required
password
→ tap [Network] → tap [EAP Certificate].
2. Tap [Local].
3. Select the desired certificate.
4. Tap [Delete].
13.2.6 Configuring the Defaults Menu
The [Defaults] menu allows an authorized user to manage the system configurations.
1. In the [Maintenance] menu, tap [Defaults].
2. Select the options described in the following table.
Options Description
Save Departmental Defaults Allows an authorized user to save the current device settings for the selected
patient category.
* The factory default settings are in bold.