Operator's Manual

Configuring the TM80/TM70 Maintenance Menu
TM80/TM70 Telemetry Monitor Operator’s Manual 13 - 11
1. In the [Network] menu, tap [Connect CMS].
2. Tap [Connection Mode] .
3. Select [Unicast].
4. Configure the desired options.
.
5. Tap [Confirm] to apply the settings and exit the [Connect CMS] menu.
13.2.5.4 Selecting a CMS
When you connect a TM80/TM70 to a CMS in unicast mode, you can select a CMS by one
of the following ways:
■ Select [Select CMS] from the [Connect CMS] menu. For details, refer to
"Connecting a CMS in Unicast Mode" on page 13 - 10.
■ Press to enter the main menu → in the [Central Monitoring System] sec-
tion, tap [Select CMS]
→ select the desired CMS.
13.2.5.5 Selecting a WiFi Band
The TM80 supports both 2.4G and 5G WiFi bands.
To select a WiFi band:
1. In the [Network] menu, tap [Wireless Setup].
2. Tap [WiFi Band].
3. Select the desired band. 5G is recommended, if available. Because there is much
more wireless interference in the 2.4GHz band.
Options Description Settings*
Edit CMS Configure the name and IP of the CMS you
want to connect.
/
Select CMS Select the CMS you want to connect. /
QOS Configure the quality of service mode for
the wireless network.
High, Normal
* The factory default settings are in bold.