Operator's Manual

Maintenance Menu Configuring the TM80/TM70
13 - 10 TM80/TM70 Telemetry Monitor Operator’s Manual
3. Tap [Confirm] to apply the settings and exit the [WLAN Setup] menu.
13.2.5.3 Configuring Connection to the CMS
You can connect a TM80/TM70 to a CMS in unicast or multicast mode.
Connecting a CMS in Multicast Mode
1. In the [Network] menu, tap [Connect CMS].
2. Tap [Connection Mode].
3. Select [Multicast].
4. Configure the desired options.
5. Tap [Confirm] to apply the settings and exit the [Connect CMS] menu.
Connecting a CMS in Unicast Mode
NOTE
• We recommend that the latest WPA2-PSK security encryption mode be
used when the TM80 is in use. It provides a strong method of security
when used with rotating strong passwords. Besides, it can provide opti-
mal mobility and connectivity performance.
• WPA/WPA2 EAP may be used but should be carefully considered,
because it may TM80 roam more slowly.
Options Description Settings*
Multicast Address Select to input the multicast address. Range: 1 to 255
Factory default: 225.0.0.8
Port It is a public port to communicate with the
Central Monitoring System.
6678, grayed and unchangeable
This option is not configurable.
Multicast TTL Select to input the Multicast Time to Live
(TTL).
Range: 1 to 255
Factory default: 1
QOS Configure the quality of service mode for
the wireless network.
High, Normal
* The factory default settings are in bold.