User's Manual

4 - 9
WARNING
• The data presented in the Remote View screen has a delay. Do not rely on this screen for real time
data.
4.7.3 Adding a Bed
After adding the desired remote devices, then the alarms from these devices can be viewed on the monitor. To
add a remote device, follow this procedure:
1. Enter the Select Bed dialog. To do so, choose either of the following ways:
◆ In the Remote View screen, select Select Bed. For more information, see 4.7.1Entering the Remote
View Screen.
◆ Select the icon at the alarm watch tile if the tile is configured to display on the main screen.
2. In the Select Bed dialog, select a desired department. All the beds under this department will be listed.
3. Select a desired tile at the A-W1or A-W2 area and then select a bed from the bed list. The selected bed will
appear in the tile.
NOTE
• The added bed is indicated by a check mark (√) at the right of the bed list.
4.7.4 Removing a Bed
To remove a remote device from remote monitoring, follow this procedure:
1. Enter the Select Bed dialog. Choose either of the following ways:
◆ In the Remote View screen, select Select Bed. For more information, see 4.7.1Entering the Remote
View Screen.
◆ Select the icon in the alarm watch tile if the tile is configured to display on the main screen.
2. In the Select Bed dialog, select a bed at the A-W1or A-W2 area, and then select Clear Bed. If you want
remove all beds, select Clear All Beds.
4.7.5 Displaying the Main Bed
In the Remote View screen, you can select a bed in the alarm watch area, then the main body of the Remote
View screen will display the real time monitoring screen of the device.
4.7.6 Saving a Manual Event
You can initiate a manual event on the remote monitor by selecting Manual Event in the Remote View screen.
4.7.7 Managing Alarms from Remote Devices
You can view and manage the alarms coming from remote devices.
If the monitor and remote devices have alarms at the same time, the monitor presents alarms according to the
following rules:
■ If the alarm tone pattern for the monitor is same as that for the remote devices, the monitor prioritizes all
the alarms and sounds the highest alarm tone.
■ If the alarm tone pattern for the monitor is different from that for the remote devices, the monitor sounds
the alarms in their corresponding tone.
The monitor provides the same alarm tone pattern for the remote device alarms as those for the monitor alarms
by default. You can change the alarm tone pattern of the remote monitor; see 25.3.5.5Setting the Tone Pattern for
Alarms from Remote Devices.