User's Manual

25 - 18
3. Input SSID, Security, and Password.
4. Select the
WLAN IP tab and select how to get the IP address.
◆ Obtain IP Address Automatically: the monitor automatically gets the IP address.
◆ Use the Following Address: you need to input the IP address, Subnet Mask, and Gateway.
5. Select how to get the DNS address:
◆ Obtain DNS Address Automatically: the monitor automatically gets the DNS address.
◆ Use the following DNS Address: you need to input the IP address of Preferred DNS server and
Alternate DNS server.
The monitor supports the following security methods: WPA2 PSK, WPA2 AES, CCKM AES, WPA PSK AES, WPA AES.
Select the security method as desired. You may need to set more parameters for some security methods.
After configuring the wireless network, select
WLAN→ Network Test to verify that the wireless network can be
properly connected.
25.12.5 Selecting WLAN Band and Channels
The monitor supports 2.4 GHz and 5 GHz WLAN. To select WLAN band rate and channels, follow this procedure:
1. Select the
Main Menu quick key → from the System column select Maintenance → input the required
password
→ select .
2. Select the
Network Setup tab → WLAN tab.
3. Select the
WLAN Setup button from the bottom left corner of the dialog.
4. Set
WLAN Band to Auto, 5G, or 2.4G according to the band you are using. The default is Auto, which
means the monitor can automatically identify the WLAN band.
5. Select Auth Server Type to set the type of authentication server.
6. Set
BGN Channel.
7. Set
AN Channel.
25.12.6 Managing Certifications
You can delete certifications from the monitor, or import certifications from the USB memory device. To do so,
follow this procedure:
1. Select the
Main Menu quick key → from the System column select Maintenance → input the required
password
→ select .
2. Select the
Network Setup tab → WLAN tab.
3. Select the
Certificate Management button from the bottom left corner of the dialog.
◆ From the Local tab, select certifications you want to delete from the monitor, and then select Delete.
◆ From the USB Drive tab, select certifications you want to import from the USB memory device, and
then select
Import.
25.12.7 Enabling Selecting a CMS
To enable selecting a CMS, follow this procedure:
1. Select the
Main Menu quick key → from the System column select Maintenance → input the required
password
→ select .
2. Select the
Network Setup tab → Central Station Setup tab.
3. Switch on
Select CMS.
25.12.8 Adding CMSs
You can add up to 30 central monitoring systems (CMS) for your monitor. To add CMSs, follow this procedure:
1. Select the
Main Menu quick key → from the System column select Maintenance → input the required
password
→ select .
2. Select the
Network Setup tab → Central Station Setup tab.