User Manual

Panorama™ Operating Instructions 0070-10-0690-01 5 - 5
Patient Setup Functions Demographics Tab
NOTE: When using a WMTS 608 bedside monitor, 15 characters
may be entered at the bedside monitor but only the first five
(5) characters will be displayed in the Bed field.
Entering a value in the Bed Field (Telepack)
1. From the Demographics tab, select the Bed field. The keyboard dialog box is
displayed.
2. Enter a bed value.
• The Backspace (<==) button clears a single character in the edit box.
•The Caps Lock button enables/disables the caps lock function. A Caps Lock
indicator displays when Caps Lock is enabled.
3. Accept or reject the text entered in the keyboard entry.
•The Close button discards the changes.
•The Enter button accepts the changes.
Last Name Field
The Last Name field is used to enter the last name of a patient. A patient's last name can
be entered at the bedside monitor or the Panorama Central Station. Information entered at
either the bedside, or at the central station, is automatically transmitted bi-directionally
between the devices.
NOTE: If the central station is communicating with an EMR system
via the Panorama Gateway, this field may auto-populate
once the “Patient Key” has been correctly entered.
1. Select the Last Name field. The keyboard dialog box is displayed.
2. Enter the patient’s last name (maximum of 15 characters).
• The Backspace (<==) button clears a single character in the edit box.
•The Caps Lock button enables/disables the caps lock function. A Caps Lock
indicator displays when Caps Lock is enabled.
3. Accept or reject the text entered in the keyboard dialog box.
•The Close button discards the changes.
•The Enter button accepts the changes.
First Name Field
The First Name field is used to enter the first name of a patient. A patient's first name can
be entered at the bedside monitor or the Panorama Central Station. Information entered at
either the bedside, or at the central station, is automatically transmitted bi-directionally
between the devices.
NOTE: If the central station is communicating with an EMR system
via the Panorama Gateway, this field may auto-populate
once the “Patient Key” has been correctly entered.
1. From the Demographics tab, select the First Name field. The keyboard dialog box
is displayed.
2. Enter the patient’s first name (maximum of 15 characters).
• The Backspace (<==) button clears a single character in the edit box.