User Manual

Demographics Tab Patient Setup Functions
5 - 4 0070-10-0690-01 Panorama™ Operating Instructions
FIGURE 5-2 Demographics Tab (WorkStation using a Bedside Monitor device)
FIGURE 5-3 Demographics Tab - Bedside and/or Telepack (ViewStation)
NOTE: The layout and functionality of the Demographics tab
changes based on the type of monitoring device assigned to
the patient tile.
5.1.3 Entering Data in the Demographics Tab
This section outlines entering and modifying data in the Demographics tab.
NOTE: Patient demographic information cannot be edited at the
ViewStation.
Select the Patient to be Set Up/Modified
Choose a patient tile by selecting its digital data or waveform area.
Device Label Field
The Device Label field displays the identification label for the device assigned to the
selected patient tile.
The device label cannot be entered or modified in the Demographics tab. Device Label
data is entered and modified via the ‘‘Equipment Setup Tab’’ as described on page 9-33.
Bed Field
The Bed field is used to display and enter the label data for bed assignment. The Bed field
can only be entered, or modified, at the bedside monitor.