User Manual

The Main Screen Getting Started
2 - 12 0070-10-0690-01 Panorama™ Operating Instructions
Table 2-1 provides a list of the tabs that are associated with each menu button.
TABLE 2-1
BUTTON PURPOSE
Patient Setup Provides access to the following tabs:
•The Demographics tab is used to enter and modify patient
demographic information (i.e, Last name, First name, ID, Bed,
Height, Weight, etc.).
•The Transfer tab is used to move patient information from tile
to tile within a Panorama Central Station or between central
stations.
•The Discharge tab is used to remove a patient from centralized
monitoring.
•The Display tab is used to select the parameter information
displayed in a patient tile.
•The Standby tab is used to temporarily suspend monitoring
while preserving patient settings and historical data.
•The Wave Gain tab is used to adjust the wave gain used for
displayed patient waveforms.
•The Print Setup tab is used to select the parameters that are
printed in a patient report.
Patient Alarms Provides access to the following tabs:
•The Patient Alarm Setup tab is an optional,
password-protected tab used to restrict access to the Patient
Alarm Limits and Alarm Responses tabs.
•The Alarm Limits tab is used to set a patient alarm limit
thresholds.
•The Alarm Responses tab is used to configure system
behaviors during alarm conditions.
Report Provides access to the following tabs:
•The Patient Reports tab is used to request patient-specific
reports.
•The System Reports tab is used to request system reports.
•The Print Status tab is used to display the list of print requests
that have been made and the status of each request.
* Indicates button is not available at the ViewStation or the WorkStation
** Indicates button is only available at the ViewStation and the WorkStation