User Manual

The Main Screen Getting Started
2 - 10 0070-10-0690-01 Panorama™ Operating Instructions
Patient Status Line
The Patient Status line (shown in FIGURE 2-5) displays patient demographic information,
physiological event messages and technical event messages. Demographic information (Last
Name, First Name, Bed, ID) is only shown if it was provided. Demographic information is
displayed as configured in the Unit Choices tab.
The following guidelines regulate the display of messages in the Patient Status line:
• A patient’s demographic information, if available, is displayed in white text.
• All Alarm Priority 1 physiological messages are displayed in red text.
• Alarm Priority 2/3 physiological messages are displayed in yellow text.
• Mute Time messages, if alarms have been silenced, are displayed in the color
associated with the alarm priority.
• Technical event messages are displayed in white text.
Waveform Data Tile
The Waveform Data tile (shown in FIGURE 2-5) displays the waveform data that was selected
for the patient tile. The Waveform Data portion of a patient tile is capable of displaying up to
two of the following waveform data parameters: ECG, Pleth, Respiration, IBP, O
2
, and
Agent. The available parameters are dependant on the selected monitoring device. For
information regarding supported devices, and parameters measured, refer to ‘‘Supported
Devices’’ on page 1-4.
Waveforms display in a patient tile using the following guidelines:
• Each waveform tile includes its own baseline.
• Waveforms are shown in a patient’s configured color, wave gain, pacer enhancement
and filter settings. If individual configurations are not set, the system default settings are
used.
For information regarding the selection of patient waveform data, refer to the ‘‘Display Tab’’
on page 5-40. For information regarding the parameters that can be shown in the waveform
tile, refer to ‘‘Parameter Specifications’’ on page 12-2.
2.3.2 Menu Bar
The Panorama Central Station, ViewStation, and the WorkStation menu bars (shown in
FIGURE 2-6, FIGURE 2-7, and FIGURE 2-8) are used to view the system status, provide
navigation for the application, and view the system time and date. All menu bars are fixed at
the bottom of the screen.