User Manual

Paging Password Tab Paging Tab (Optional)
15 - 2 0070-10-0690-01 Panorama™ Operating Instructions
15.1 Paging Password Tab
The Paging password tab (shown in FIGURE 15-1) provides password protected access to
the system paging configuration tab. When the correct password is entered, the Paging tab
is opened.
The Paging password tab is only shown if the Paging Password Protection option is set to
ON in the Unit Choices tab. If Paging Password Protection is OFF, the Paging menu
button provides direct access to the Paging tab. For additional information regarding the
Unit Choices tab, refer to “Unit Choices Tab” on page 9-50.
The Paging tab is not available at the ViewStation.
15.1.1 Accessing the Paging Tab
From the Menu Bar, select the Paging menu button. The Paging password tab is
displayed.
FIGURE 15-1 Paging Password tab
15.1.2 Entering a Password
To enter a password:
1. Select the Password text box in the Paging password tab. The keyboard dialog box
is displayed.
2. Use the keyboard dialog box to enter the password that was created in the Passwords
tab (maximum 15 characters). For security purposes asterisks (*) are shown for each
typed character. For additional information regarding passwords, refer to the
‘‘Passwords Tab’’ on page 9-29 or contact your System Administrator.
NOTE: Passwords are case sensitive.
• The Backspace (<==) button clears a single character in the edit box
•The Caps Lock button enables/disables the caps lock function. A Caps Lock
indicator is shown when Caps Lock is enabled.
•The Close button discards the changes
•The Enter button accepts changes