User Manual

Network Tab Network Tab (Optional)
14 - 6 0070-10-0690-01 Panorama™ Operating Instructions
ViewStation or WorkStation tile
goes into a Communication
Lost state
Host tile at central station is in
a Lost Communication state.
Reestablish communication at
host central station, and if
necessary, contact a
Datascope Service
Representative.
ViewStation or WorkStation
tile goes into a Standby state
Host tile at central station is in
a Standby state.
Wait for host patient tile to be
removed from Standby state.
Patient tile not available in
Network tab list box
Network tab needs to be
refreshed.
Select the Network tab
Refresh button.
ViewStation or WorkStation is
in a Central Communication
Lost state.
Contact a Datascope Service
Representative.
Patient not currently being
monitored on any of the C-LAN
central stations.
Admit the patient to a central
station on the C-LAN, then
assign the patient to an
available tile at the
ViewStation or WorkStation.
Host patient tile information is
displayed at the host central
station but not at the
ViewStation or WorkStation
Association between host
central station patient tile and
ViewStation or WorkStation
patient tile has not been
established.
Assign the tile in the Network
tab at the ViewStation or
WorkStation.
Selected tile is currently
assigned.
Attempted to assign a patient
tile at the ViewStation or
WorkStation that is already
assigned.
Assign the patient to another
tile number, if one is available.
MESSAGE/ISSUE * REASON SOLUTION
* Messages are shown in all bold text.