User Manual

Panorama™ Operating Instructions 0070-10-0690-01 14 - 5
Network Tab (Optional) Network Tab
• Any new equipment is added at the host central station
• Any existing equipment is removed from the host central station
• Any existing equipment is edited at the host central station
• Any patient demographic information (Last Name, First Name, ID, Bed, Doctor) or
Central Station name/tile number is edited at the host central station
14.1.7 Troubleshooting
This section lists some of the potential messages and issues that may occur while using the
Network tab.
MESSAGE/ISSUE * REASON SOLUTION
The Add button disabled. No row has been selected in
the Network tab list box.
Select a row in the Network
tab list box.
Selected row is already
assigned to a tile at the
ViewStation or WorkStation.
Select a different row.
The Remove button is
disabled.
The selected row(s) in the
Network tab does not
currently have a tile
assignment(s) or no tile(s) have
been assigned at the
ViewStation or WorkStation.
Establish tile assignment(s) at
the ViewStation or
WorkStation.
The Remove All button is
disabled.
No tile(s) have been assigned
at the ViewStation or
WorkStation.
Establish tile assignment(s) at
the ViewStation or
WorkStation.
You have reached the
maximum number of
channel licenses
available.
All the tiles at the ViewStation
or WorkStation are currently
occupied.
Remove a patient from one of
the patient tiles at the
ViewStation or WorkStation.
Patient tile no longer
displaying patient data at
ViewStation or WorkStation.
Communication between the
host central station and the
ViewStation or WorkStation
has been interrupted (Central
Communication Lost state).
Contact a Datascope Service
Representative.
A Room to Room Without
Device transfer out for the host
tile has been completed.
Refresh the Network tab list
box, and then assign the
transferred patient tile to an
available tile at the
ViewStation or WorkStation.
A Central to Central Without
Device transfer out for the host
tile has been accepted.
Refresh the Network tab list
box, and then assign the
transferred patient tile to an
available tile at the
ViewStation or WorkStation.
Host tile at central station is in
a Discharge state.
Retrieve patient from Discharge
list, if possible, then reassign
the retrieved patient tile to an
available tile at the
ViewStation or WorkStation.
* Messages are shown in all bold text.