User Manual

Panorama™ Operating Instructions 0070-10-0690-01 14 - 3
Network Tab (Optional) Network Tab
NOTE: Once a tile is assigned to an associated tile at the
ViewStation or the WorkStation, the association to the host
patient tile will continue to exist, even if the patient is
discharged or the monitoring equipment is removed from
the Equipment List at the host central station. Therefore,
when a new patient is admitted to the host central station,
the patient data will automatically be displayed at the
associated ViewStation or the WorkStation tile.
NOTE: To determine which host patient tile the ViewStation or the
WorkStation tile is associated with, scroll to the Central
column in the Network tab.
To assign a patient tile in the Network tab:
1. Select a row in the Network tab list box that does not contain a tile assignment
number.
2. Select the Add button. The Tile Number list box is displayed (shown in FIGURE 14-2).
FIGURE 14-2 Tile Number List Box
NOTE: The ViewStation or WorkStation single or dual display
configuration dictates the maximum number of tiles that can
be assigned. Table 14-1 shows how many tiles can be
assigned when using a single or dual display configuration.
3. Select a tile from the list box.
4. Accept or reject the selection.
• Select the Done button to accept the tile assignment and display the patient’s data,
from the assigned tile, at the ViewStation or WorkStation within five (5) seconds.
• Select the Cancel button to reject the tile assignment and close the Tile Number list
box.
TABLE 14-1
VIEW ONLY WORKSTATION CONFIGURATION NUMBER OF TILES
Single display - 8 tiles 0 - 7
Single display - 12 tiles 0 - 11
Dual display - 24 tiles 0 - 23