User Manual

The Panorama Central Station Getting Started
2 - 2 0070-10-0690-01 Panorama™ Operating Instructions
2.1 The Panorama Central Station
The Panorama Central Station collects patient data from both wireless and hardwired devices
and displays it based on its configured settings. Data is collected from the bedside monitors
(Passport 2
®
/Spectrum
™
) and Panorama Telepacks (2.4 GHz and 608 Mhz). The type of
data that is collected and viewed is determined by the monitoring device and the selected
parameters.
The Panorama Central Station uses either a single or dual display. Single display setups can
accommodate eight (8) or 12 patient tiles. Dual display setups can accommodate up to eight
(8) patient tiles per display, showing a maximum of 16 patient tiles between the two
displays.
The full screen display (shown in FIGURE 2-1) includes patient tiles for viewing patient data
and a menu bar for navigating the system.
NOTE: The Paging menu button will only be displayed if the Paging
option has been installed.
FIGURE 2-1 Full Screen Display (Central Station with Paging Option Installed)
Patient Tiles
Menu Bar