User Manual

LED Indicator Lights Telepack (Optional)
10 - 6 0070-10-0690-01 Panorama™ Operating Instructions
NOTE: If a 3-wire Lead set is used, a maximum of three lights will
illuminate. If a 5-wire Lead set is used, a maximum of five
lights will illuminate.
10.3.2 Link Status LED Indicator Light
The Telepack Link Status LED indicator light verifies the Telepack’s connection to the
Panorama Patient Monitoring Network.
The Link Status LED indicator light remains on for approximately 10 seconds during the initial
power up and during the test sequence.
Press the CHECK button to verify the Telepack’s link status with the wireless network. The
Telepack’s Link Status LED indicator light shows the results of the link status test:
• Link Status LED Indicator Light (Telepack-2.4):
On — Connection to the Panorama Central Station is successful.
Off — Connection to the Panorama Central Station is unsuccessful. Telepack may be out
of range from an access point to the Panorama Central Station, or the battery may need
to be replaced.
Flashing — Attempting to connect to the Panorama Central Station.
• Link Status LED Indicator Light (Telepack-608):
On — Telepack is within range of the Panorama wireless network.
Off — Telepack is out of range of the Panorama wireless network, or the battery may
need to be replaced.
NOTE: When the CHECK button is pressed, all of the device LED
indicator lights are tested simultaneously.
10.3.3 Battery Status LED Indicator Light
The Telepack Battery Status LED indicator light verifies the status of the Telepack’s batteries.
Press the CHECK button to verify the Telepack’s battery status.
NOTE: When the CHECK button is pressed, all of the device LED
indicator lights are tested simultaneously.
During this test sequence, the Battery Status LED indicator light will remain on for
approximately 10 seconds if the Telepack batteries have more than 2 hours of battery life
remaining. A flashing Battery Status LED light indicates the Telepack batteries have less than
2 hours of battery life remaining. An unlit Battery Status LED light indicates the Telepack
batteries should be replaced immediately, or that they have been incorrectly inserted.
NOTE: The Telepack device should not be used for battery storage
purposes.
NOTE: When a Telepack is assigned to a patient tile, the battery
charge percentage integer, and percent sign (%) are
displayed in the digital data tile at the central station.
NOTE: The Telepack batteries used may be subject to local
regulations regarding disposal. At the end of the battery
life, never dispose of the batteries in a fire. Batteries should
be disposed of in accordance with any local regulations.