User Manual

Table Of Contents
Panorama™ Operating Instructions 0070-10-0690-01 9 - 67
System Setup Functions Wireless Tab
Connect Field
The Connect field displays the status of the connection between the Panorama Central
Station and the wireless device. A connection status is shown in the Connect field when the
Wireless tab’s Read sidebar button is selected. The status in the Connect field cannot be
edited and has a factory default setting of blank.
The messages shown in the Connect field include:
Software Version
The Software Version field displays the version of software currently in use by the wireless
device. Data is shown in the Software Version field when the Wireless tab’s Read sidebar
button is selected. The factory default setting is blank. If the read was not successful the
Software Version field will remain blank. To view the connection status of the wireless device
check the message in the Connect field.
Hardware Version
The Hardware Version field displays the version of hardware in use by the connected
device. Data is shown in the Hardware Version field when the Wireless tab’s Read sidebar
button is selected and has a factory default setting of blank. If the read was not successful the
Hardware Version field will remain blank. To view the connection status of the wireless
device check the message in the Connect field.
Lead Selection
The Lead Selection button sets and displays the ECG lead for the attached wireless device.
ECG lead selection options include Lead I, Lead II and Lead III.
Data is shown in the Lead Selection field when the Wireless tab’s Read sidebar button
is selected. Lead Selection has a factory default setting of blank. If the read was not
successful the Lead Selection field will remain blank. To view the connection status
check the message in the Connect field.
The Lead to be monitored by a connected device can be assigned by selecting the
Program sidebar button.
NOTE: The Lead Selection button will not be shown when the
device cannot be recognized or there is a Read error.
MESSAGE REASON
Connected to 608 Telemetry The connection with the Telepack-608 or 608
Instrument Radio was successful.
Not Connected The connection with the wireless device was not
successful.
Error: Could not receive data The connection with the wireless device was not
successful. Either there was no response from the
device or the device is not connected.