User Manual

Supported Devices System Overview
1 - 12 0070-10-0690-01 Panorama™ Operating Instructions
Additional Information
For additional information regarding Spectrum OR
™
bedside monitors, refer to the Spectrum
OR Operating Instructions (P/N 0070-00-0670-XX).
For information regarding the parameters that can be monitored by the Spectrum OR, refer to
the ‘‘Parameter Specifications’’ on page 12-1.
INSP/ET Iso Gas Module is in use at the bedside
device.
Agent Iso Inspired
Agent Iso End Tidal
INSP/ET Enf
Gas Module is in use at the bedside
device.
Agent Enf Inspired
Agent Enf End Tidal
INSP/ET Des Gas Module is in use at the bedside
device.
Agent Des Inspired
Agent Des End Tidal
INSP/ET Sev Gas Module is in use at the bedside
device.
Agent Sev Inspired
Agent Sev End Tidal
INSP/ET Hal
Gas Module is in use at the bedside
device.
Agent Hal Inspired
Agent Hal End Tidal
INSP/ET Agent Gas Module is in use at the bedside
device.
Agent Inspired Alarm
Agent ET Alarm
NIBP (Systolic,
Diastolic, Mean,
Elapsed Time)
NIBP always displayed even if
parameter not monitored.
Low NIBP Systolic
High NIBP Systolic
Low NIBP Diastolic
High NIBP Diastolic
Low NIBP Mean
High NIBP Mean
Temp 1/Temp 2 Temperature sensor is in use at the
bedside monitor.
Low Temperature 1
High Temperature 1
Low Temperature 2
High Temperature 2
Delta T At least two temperature sensors in use
at the bedside. Spectrum/Spectrum OR
External Parameter Module (EPM) is
installed.
Low Delta T Alarm
High Delta T Alarm
Temp Blood Spectrum/Spectrum OR External
Parameter Module (EPM) is in use at the
bedside.
Low T blood Alarm
High T blood Alarm
Pulmonary Artery
Wedge Pressure
(PAWP)
One IBP must be labeled PA. New PAWP Measurement
CO Spectrum/Spectrum OR External
Parameter Module (EPM) is in use at the
bedside.
New CO Measurement
Parameters/Waveforms
PARAMETERS SETTINGS PANORAMA ALARMS