User Manual

Panorama™ Operating Instructions 0070-10-0690-01 9 - 47
System Setup Functions Unit Priorities Tab
9.13 Unit Priorities Tab
The Unit Priorities tab (shown in FIGURE 9-36) determines the initial order in which
parameters in the Main Screen, Bedside tab, Trends tab, and Events (List) are displayed.
This tab is not available at the ViewStation or the WorkStation. Unit priority settings are
transferred from the host central station to the ViewStation and the WorkStation when the
patient tile is assigned.
9.13.1 Accessing the Unit Priorities Tab
1. From the menu bar, select the System Setup button. The first set of System Setup tabs
is displayed.
2. Follow the directions in the "Entering a Password" section on page 9-7.
3. Once the correct password has been entered, the tabs associated with the System
Setup button are displayed.
4. Select the More tab. The next set of System Setup tabs is displayed.
5. Select the Unit Priorities tab. The Unit Priorities tab is displayed.
FIGURE 9-36 Unit Priorities Tab
9.13.2 Setting a Default Order in the Unit Priorities Tab
This section outlines how to select the parameter order in the Unit Priorities tab.
Selecting the Unit Priority Order
1. Select a Unit Priority number button.
The parameter with the number 1 priority will always be Heart Rate.
2. Select a parameter tile from the Parameter list.
A parameter has been selected when it changes from white text with a black
background to black text with a white background.
NOTE: Parameters show their current unit priority position in
parentheses next to their name in the Parameter list.