User Manual

Panorama™ Operating Instructions 0070-10-0690-01 8 - 35
Report Functions System Reports Tab
• Label displays the equipment device label. For additional information regarding Device
ID’s, refer to the ‘‘Equipment Setup Tab’’ on page 9-33.
•Type displays the type of device that is attached to the central station. For example, a
Telepack WMTS or a Passport 2
®
.
• Tile displays the tile the device is attached to. Six dashes (- - - - - -) display in this column
if the tile number associated with the device in the Equipment Setup dialog is None.
• Device ID displays the ID of the device or unit. Six dashes display in this column if the
device is a Panorama Central Station.
• Patient Name displays the first name and last name of the patient attached to the
device. If a patient is not attached to the device, the report displays six dashes in this
column. Dashes also display if the device attached to the patient does not have the
patient’s first and last name entered.
• Patient ID displays the identification number of the patient attached to the device. Six
dashes display in this column if the device attached to the patient does not have the
Patient ID entered.
8.2.3.3 Footer
The Equipment Report contains a footer at the bottom of every page. The footer includes:
• The date and time of the print request. The format displayed is taken from the System
Date/Time tab.
• A centered page number.
• The name of the Panorama Central Station where the report was generated.
• The serial number of the Panorama Central Station where the report was generated.
8.2.3.4 Printing the Equipment Report
The Equipment Report is printed in portrait orientation, using any of the following methods:
•From the System Report tab, select the Equipment Report button.
NOTE: The Equipment Report button is not available at the
ViewStation.
•From the Equipment Setup tab, select the Print menu bar button.
Requesting this report posts a print job in the system Print Status tab. For additional
information, refer to the “Print Status Tab” on page 8-38.
8.2.4 Paging Report
The Paging Report (shown in FIGURE 8-24) prints all the currently assigned pagers, lists who
each pager is assigned to, and specifies which patient tiles are assigned to which pagers.
This report contains a row for every pager listed in the Paging tab and can contain a
maximum of 100 pager assignments. Depending on the number of assigned pagers, this
report may contain more than one page.
NOTE: The Paging Report is not available at the ViewStation.