User Manual

Patient Reports Tab Report Functions
8 - 2 0070-10-0690-01 Panorama™ Operating Instructions
8.1 Patient Reports Tab
The Patient Reports tab (shown in FIGURE 8-1) is used to print patient-specific reports.
The following reports can be printed from the Patient Reports tab:
• All Strips Report
• Full Disclosure Report
•ST Report
• Trend List Report
• Event List Report
• Patient Alarm Report
8.1.1 Accessing the Patient Reports Tab
1. From the menu bar, select the Report button.
2. Select the Patient Reports tab. The Patient Report tab is displayed.
3. Choose a patient tile by selecting its digital data or waveform area. If available, the
patient’s last name and bed number display in the patient demographic field.
FIGURE 8-1 Patient Reports Tab
8.1.2 All Strips Report
The All Strips Report (shown in FIGURE 8-2 and FIGURE 8-3) contains real-time monitoring
data, all current digital numeric values and all current configured waveforms for the selected
patient tile. The report includes a header, digital data, waveform data and a footer section.
NOTE: This report is not available when the selected patient tile is
in a Communications Lost, Waiting for Patient, or Standby
state.
Patient Demographic Field