User Manual

Events Tab Views
7 - 34 0070-10-0690-01 Panorama™ Operating Instructions
Digital Data Area
The following seven (7) parameters can display in the digital data area depending on the
bedside monitor configuration.
•PVC/min
• Temperature 1
• Temperature 2
• T Blood
•N2O
•CO/CI
•PAWP
NOTE: The Temperature 1, Temperature 2, and T Blood parameters
are only displayed when they are used in the calculation of
the Delta Temperature parameter.
Time Interval Area
The time interval area is displayed in one second intervals. A total of nine seconds can be
viewed on the screen at one time. Each second shown displays a time label over each
one-second grid line in the waveform area.
Event Description Area
The event description area displays the event that was selected in the Event List view. For
example, a High Heart Rate Alarm.
NIBP Area
The NIBP area displays the NIBP systolic pressure, diastolic pressure, mean pressure, and
elapsed time.
Date Area
The date area indicates the date the event occurred and was stored in the Events database.
Data Display Area
If data is available, the Waveforms view displays 20 seconds of waveform data. The
initial Waveforms view displays the first nine seconds of waveform data before the alarm
was triggered, and can display three to four waveforms and/or digital data tiles at one time.
Colored Vertical Cursor Line
The colored vertical cursor line extends from the first waveform to the last waveform on the
display. The colored vertical cursor line can be moved to indicate the specific time within the
event.
7.3.5.2 Navigating in the Waveforms View of the Events Tab
Navigating in the Waveforms view is accomplished by using buttons. When the
Waveforms view is first opened, the colored vertical cursor line will be positioned in the
far right position.