User Manual

Transfer Tab Patient Setup Functions
5 - 28 0070-10-0690-01 Panorama™ Operating Instructions
• For all transfers to a Panorama Telepack, the bed ID is cleared and the patient size
changes to Adult (the Telepack default). The remaining demographic data is preserved.
Alarms
• The transferred patient's Alarm Limits, Alarm Delay and ST Alarm Delay change to those
of the destination device.
5.2.4 Sidebar Buttons
The following sidebar buttons are used to expand the functionality of this tab.
Recover Patient
When a Central To Central Transfer Without Device has failed, the Recover
Patient sidebar button is used to retrieve patient information that was collected in the Failed
Transfer List.
The list box in the Recover Failed Transfer Patients view (shown in FIGURE 5-17) has
three columns labeled First Name, Last Name and ID. The list contains at least two of these
three demographic indicators.
1. Select a destination tile on the Source Panorama to which the patient information is to be
recovered. Ensure that the destination tile has a device assigned.
2. Select the Recover Patient sidebar button. The Recover Failed Transfer Patients
view is displayed.
FIGURE 5-17 Recover Failed Transfer Patients View
3. Select the patient whose information is to be recovered from the list.
• Select the Recover button. The message All of the patient's data will be deleted
in the destination tile. Do you still want to continue with the transfer? is
displayed with the following two choices:
•The Yes button deletes all of the patient’s data that may have been previously stored
for the destination tile, returns to the Transfer tab and the recovery process begins.
When the recovery is complete, the patient information is removed from the Failed