User Manual

Introduction Warnings, Precautions and Notes
x 0070-10-0690-01 Panorama™ Operating Instructions
Warnings
WARNING: Only qualified and trained personnel or Datascope Service
personnel should attempt to service Datascope equipment.
Service is defined as any activity requiring the cover to be
removed for internal adjustments, parts replacements,
repairs or software upgrades of any kind to insure
compatibility.
WARNING: To insure compatibility with the operating system and
applications software, use only Datascope Corp. supplied
and/or approved components to repair any part of the
Panorama Patient Monitoring Network. Use of
unauthorized software, devices, accessories, or cables other
than those approved by Datascope may render the
application unsuitable for medical patient monitoring. It
may also result in increased electromagnetic emissions or
decreased Immunity of the system.
WARNING: Route cables neatly. Ensure cables are not in the way of
patient or hospital personnel.
WARNING: Do not incinerate batteries, possible explosion may occur.
WARNING: Some of the equipment on the Panorama Patient Monitoring
Network must utilize the hospital emergency power system.
Failure to do so will result in loss of monitoring during
extended periods of power failure. The back-up power time
period, for the Panorama Patient Monitoring Network, is
limited.
WARNING: The 18.1" flat panel may tip over if the display head is
inclined to an angle greater than 45° backward tilt. If the
user elects to have the display head inclined to an angle
greater than 45° backward tilt, the flat panel must be
attached to a secure mounting surface via three screw
locations on the bottom of the base.
WARNING: Do not put MPSO (Multiple Portable Socket Outlets, i.e.,
multiple outlet extension cords) used with the Panorama
Patient Monitoring Network equipment on the floor. Connect
only approved accessories and components to the same
MPSO as the Panorama Patient Monitoring Network
equipment. Do not overload MPSOs. Use only MPSOs that
comply with the requirements of IEC 60601-1-1.
WARNING: Incorrect setting or silencing of patient alarms can
jeopardize patient safety.
WARNING: When the Suspend Non-Lethal alarms sidebar button is
enabled, the Panorama Central Station will not monitor any
non-lethal arrhythmias, and will not display numeric
physiological or technical alarms for the selected patient tile.
WARNING: When the Suspend All Alarms sidebar button is enabled, the
Panorama Central Station will not monitor any lethal or
non-lethal arrhythmias and will not display numeric
physiological or technical alarms for the selected patient tile.