User Manual

Panorama™ Operating Instructions 0070-10-0690-01 5 - 17
Patient Setup Functions Demographics Tab
FIGURE 5-13 Retrieve Discharged Patient Setting View
2. Select the patient to be retrieved.
3. Accept or reject the patient retrieval in the Retrieve Discharged Patient Setting
view.
•The Done button accepts the patient retrieval.
•The Cancel button discards the patient retrieval, closes the view, and returns to the
Demographics tab.
5.1.3.6 Simultaneous Patient Demographic Tab Editing
Bedside Menu
If using a bedside device with the Panorama Central Station, patient demographic changes
cannot be made at the bedside monitor, central station, and the WorkStation simultaneously.
The bedside device will take precedence, followed by the central station, ending with the
WorkStation. When an attempt is made to make changes simultaneously, the message
These settings are currently being edited remotely. will be displayed at the central
station or WorkStation, depending on where the change was initiated. If there are multiple
WorkStations on the network, the first WorkStation that initiates the change will take
precedence over any other WorkStation attempting to implement the same change.
These are the scenarios in which this message will be displayed:
Patient Menu (Passport 2, Spectrum, and Spectrum OR only)
• The Patient Menu is active at the bedside monitor and then the Demographics tab is
opened at the central station or the WorkStation
•The Demographics tab is active at the central station or WorkStation and then the
Patient Menu is opened at the bedside monitor
Arrhythmia Menu (Passport 2, Spectrum, and Spectrum OR only)
• The Arrhythmia Menu is active at the bedside monitor and then the Arrhythmia Menu
dialog is opened at the central station
• The Arrhythmia Menu dialog is active at the central station and then the Arrhythmia
Menu is opened at the bedside monitor
CO Setup Menu (applies to the Spectrum and Spectrum OR only)