User Manual

Demographics Tab Patient Setup Functions
5 - 10 0070-10-0690-01 Panorama™ Operating Instructions
Patient Size Field
The Patient Size field is used to identify the size of the patient in the selected patient tile.
The options for patient size include Adult, Pediatric and Neonate. The default patient size is
Adult.
The value for the Patient Size field must be selected at the bedside monitor.
NOTE: Verify monitoring settings when the Patient Size is changed.
Date Of Birth Field
The Date Of Birth field is used to enter the patient’s date of birth. A patient's date of birth
can be entered at the bedside monitor or the Panorama Central Station. Information entered
at either the bedside, or at the central station, is automatically transmitted bi-directionally
between the devices.
NOTE: If the central station is communicating with an EMR system
via the Panorama Gateway, this field may auto-populate
once the “Patient Key” has been correctly entered.
To enter a date of birth:
1. From the Demographics tab, select the Date Of Birth field. The Date Of Birth
dialog box (shown in FIGURE 5-7) is displayed.
FIGURE 5-7 Date Of Birth Dialog Box
2. Rotate the dial controls to select the month, day and year values. Refer to the following
value ranges.
3. Accept or reject the selection made in the Date Of Birth dialog box.
•The Done button accepts the selections.
•The Cancel button discards the selections, closes the dialog box and returns to the
Demographics tab.
TIME FRAME RANGE
Month 1 to 12
Day Dependant on the month selected
Year 1891 to current year
Dial Control
Edit Box