Installation Guide

Panorama WMTS Installation Guide 0070-00-0571 5 - 5
Programming and Configuring Telemetry Devices Instrument Radios
5.4 Instrument Radios
NOTE: The radio card is static sensitive. Use proper anti-static
measures when handling, programming and installing the
radio card.
1. Connect the programming module (P/N 0012-00-1541-01) to the instrument radio
card.
2. Connect the external power supply to the programming cable.
3. Press the Read button. The Device ID, software and hardware versions, and connection
status will be displayed in their respective windows. Record the Device ID number for
later reference.
NOTE: If there is an error message in the Connect Window in the
programming menu, check the cabling between the Serial
port 1 on the Central station to the programming adapter,
and try again.
4. Select the desired settings and press the Program button. A pop-up window will
appear asking if you want to program the telemetry device. Press the Yes button to
program the Instrument transceiver.
If the device is programmed successfully, a pop-up window will display:
5. Disconnect the Instrument radio from the programming module.
6. Label the radio card with its ID number and serial number.
Repeat for the remaining Instrument radio cards.
“Wireless device programmed successfully".