Installation Guide

Tools and Equipment Required System Installation
2 - 4 0070-00-0571 Panorama WMTS Installation Guide
9. Connect one end of the crossover cable to the Patient Network connector on the rear of
the Panorama Server and connect the other end of the crossover cable to the Patient
Network connector on the rear of the central station.
Non-direct Connection of the Telemetry Server(s) to the Central
Station
Non-direct connection is via a hub or switch on the E-LAN using a CAT5s patch cable (P/N
0012-00-1274-XX).
1. Connect one end of the cable to the connector on the Patient Network connector on the
rear of the Server and connect the other end to the E-LAN Hub or Switch.
2. At the central station location, connect a straight through CAT5s patch cable (P/N
0012-00-1274-XX) from the wall plate to the Patient Network connector on the rear of
the central station.
Connection of Hardwired Devices to the E-LAN
Connect patch cables from the individual devices to the input ports of the Hub/Switch/patch
panel.