Installation Guide

Tools and Equipment Required System Installation
2 - 2 0070-00-0571 Panorama WMTS Installation Guide
2.1 Tools and Equipment Required
• Panorama™ Service Manual (P/N 0070-00-0634)
• Laptop computer with 100 MB LAN card
• Battery powered portable drill
• 1¾ inch hole saw
• Phillips screw driver
• Ladder
• Spectrum analyzer
• N male to SMA female adapter (P/N 0454-00-0039-02)
• 2 Flexible antennas (P/N 0992-00-1003)
• Test Telepack (P/N 0454-00-0037-XX)
• RF attenuators (P/N 0454-00-0038-XX)
• SMA male to male adapter cable (P/N 0454-00-0049-XX)
• SMA male to BNC adapter cable (P/N 0454-00-0041-XX)
2.1.1 Installing The Wireless Server
• Install the Panorama Telemetry Server(s) into the rack.
• Place the Panorama Telemetry Server(s) onto the shelf.
Connection of the Panorama Telemetry Server to the TIM Transceiver is via a LVDS (low
voltage differential signaling) cable (0012-00-1522-01 -02, or -04).
• The -01 cable is 0.5 meters (1.64 ft).
• The -02 cable is 1.5 meters (4.9 ft).
• The -04 cable is 1 meter (3.28 ft.)