User's Manual

Panorama™ Operating Instructions 0070-00-0575-50 5 - 11
Patient Setup Functions Demographics Tab
3. Select the ST lead to be monitored.
4. Select the ST Filter mode.
A checkmark in the Monitor Filter box indicates that the monitor filter is enabled.
A checkmark in the ST Filter box indicates that the ST filter is enabled.
NOTE: Only 1 filter mode can be selected in the Settings dialog
box.
5. Accept or reject the selections.
•The Done button accepts the selections.
•The Cancel button discards the selections, closes the dialog box and returns to the
Demographics tab.
Retrieve Discharged Pt.
Select the Retrieve Discharged Pt. sidebar button to retrieve a patient from the discharge
list. A patient is only added to the discharge list if at least two of the three demographics
fields (first name, last name, ID) were previously entered.
The Retrieve Discharged Patient Setting view (FIGURE 5-9) provides a list of the
discharged patients that can be retrieved. The list has four columns labeled First Name, Last
Name, ID and Discharge Time. Each row in the list contains at least two of the three
demographic indicators and the discharge time for a patient. The list displays the 5 most
recently discharged patients. When the next patient is added to the list, the oldest patient
data on the list is removed and permanently deleted from the system.
A discharged patient can be retrieved into a patient tile that is not actively monitoring a
patient.
A discharged patient can be retrieved into any empty tile.
A discharged patient can be retrieved into a tile assigned a different monitoring device
than was previously assigned to that patient.
Retrieving a discharged patient into a patient tile:
A. If a 3-lead cable is used the ST lead is not selected.
B. If a 3-lead cable is used the ST lead is not selected.
•The ST Lead 1 button selects the first ST monitoring
lead.The selections available for ST Lead 1 include I, II,
III, aVR, aVL, aVF and V.
•The ST Lead 2 button selects the second ST monitoring
lead.The selections available for ST Lead 2 include I, II,
III, aVR, aVL, aVF and V.
•The ST Lead 3 button selects the third ST monitoring
lead.The selections available for ST Lead 3 include I, II,
III, aVR, aVL, aVF and V.
NOTE: The lead choices for ST Lead 1,
ST Lead 2 and ST Lead 3 are
mutually exclusive.