User's Manual

Demographics Tab Patient Setup Functions
5 - 4 0070-00-0575-50 Panorama™ Operating Instructions
First Name Field
The First Name field is used to enter the first name of a patient. A patient’s first name can
be entered at the bedside monitor, or the Panorama Central Station because the system
enables an automatic bi-directional flow of information.
1. From the Demographics tab, select the First Name field. The keyboard dialog box
is displayed.
2. Enter the patient’s first name (maximum of 15 characters).
• The Backspace (<==) button clears a single character in the edit box.
•The Caps Lock button enables/disables the caps lock function. A Caps Lock
indicator displays when Caps Lock is enabled.
3. Accept or reject the text entered in the keyboard dialog box.
•The Close button discards the changes.
•The Enter button accepts the changes.
ID Field
The ID field is used to enter an identification value for a patient. A patient’s ID can be
entered at the bedside monitor or the Panorama Central Station because the system enables
an automatic bi-directional flow of information.
1. From the Demographics tab, select the ID field. The keyboard dialog displays.
2. Enter the patient’s ID (maximum of 15 characters).
• The Backspace (<==) button clears a single character in the edit box.
•The Caps Lock button enables/disables the caps lock function. A Caps Lock
indicator displays when Caps Lock is enabled.
3. Accept or reject the text entered in the keyboard dialog box.
•The Close button discards the changes.
•The Enter button accepts the changes.
Height Fields
The Height fields display the patient height in metric and standard units. The field on the left
is used to enter the patient’s height. The unit of measure for this field is dependent on the
setting at the bedside monitor. The field on the right automatically displays the conversion of
the measurement. A patient’s height can be entered at the bedside monitor or the Panorama
Central Station because the system enables an automatic bi-directional flow of information.
1. From the Demographics tab, select the Height field. The Height dialog box
(FIGURE 5-3) displays.