User's Manual

Panorama™ Operating Instructions 0070-00-0575-50 5 - 3
Patient Setup Functions Demographics Tab
5.1.2 Entering Data in the Demographics Tab
This section outlines entering and modifying data in the Demographics tab.
Select the Patient to be Set Up/Modified
Choose a patient tile by selecting its digital data or waveform area. The patient’s last name
and bed number are displayed in the Demographics field.
Device Label Field
The Device Label field displays the identification label for the device assigned to the
selected patient tile.
The device label cannot be entered or modified in the Demographics tab. Device Label
data is entered and modified via the ‘‘Equipment Setup Tab’’ as described on page 9-21.
Bed Field
The Bed field is used to display and enter the label data for bed assignment.
Entering a Value in the Bed Field (Bedside Monitor)
•The Bed field can only be entered, or modified, at the bedside monitor.
Entering a Value in the Bed Field (Telepack)
1. From the Demographics tab, select the Bed field. The keyboard dialog box is
displayed.
2. Enter a bed value (maximum of 15 characters).
• The Backspace (<==) button clears a single character in the edit box.
•The Caps Lock button enables/disables the caps lock function. A Caps Lock
indicator displays when Caps Lock is enabled.
3. Accept or reject keyboard entry.
•The Close button discards the changes.
•The Enter button accepts the changes.
Last Name Field
The Last Name field is used to enter the last name of the patient. A patient’s last name can
be entered at the bedside monitor or the Panorama Central Station because the system
enables an automatic bi-directional flow of information.
1. Select the Last Name field. The keyboard dialog box is displayed.
2. Enter the patient’s last name (maximum of 15 characters).
• The Backspace (<==) button clears a single character in the edit box.
•The Caps Lock button enables/disables the caps lock function. A Caps Lock
indicator displays when Caps Lock is enabled.
3. Accept or reject the text entered in the keyboard dialog box.
•The Close button discards the changes.
•The Enter button accepts the changes.