User's Manual

Quick Reference Guide Getting Started
2 - 18 0070-00-0575-50 Panorama™ Operating Instructions
6. Choose the Select button to confirm the choice.
For additional information regarding parameter display, refer to‘‘Display Tab’’ on page 5-
29.
2.4.5 Patient Alarms
Patient alarms provide for customized alarm limits and responses based on patient need. For
additional information on Patient Alarms, refer to ‘‘Patient Alarm Setup Tab (Optional)’’ on
page 6- 2.
Alarm Limits
Alarm limits are the threshold settings at which a parameter alarm occurs. The Bedside
Alarm Tracking option allows for the bi-directional communication of patient alarm limits
between the bedside monitor and the Panorama Central Station.
To adjust alarm limits:
1. Select the Patient Alarms menu button.
2. Choose a patient tile by selecting its digital data or waveform area.
3. Select the Alarm Limits tab.
4. Select the parameter alarm limits to adjust. Use the slider bars to adjust the alarm limits.
If Bedside Alarm Tracking is enabled, alarm limit adjustments are sent to the
bedside monitor.
To adjust Alarm Limits at the bedside monitor with Alarm Tracking activated refer to bedside
monitor’s Operation Instructions. Passport 2® (P/N 0070-00-0440) and Spectrum™ (P/N
0070-00-0555-XX)
For additional information on Alarm Limits, refer to "Alarm Limits Tab (Patient)’’ on page 6-4.
Alarm Responses
Alarm Responses determine the behavior of alarms when an alarm violation occurs at the
Panorama Central Station.
To adjust alarm responses:
1. Select the Patient Alarms menu button.
2. Choose a patient tile by selecting its digital data or waveform area.
3. Select the Alarm Responses tab.
4. Select the parameter.
5. Adjust the alarm responses for the parameter.
For additional information on Alarm Responses, refer to "Alarm Responses Tab (Patient)’’ on
page 6-9.