User's Manual

Panorama™ Operating Instructions 0070-00-0575-50 2 - 17
Getting Started Quick Reference Guide
5. A message dialog box is displayed.
a. If at least two of the three required demographic fields (First Name, Last Name,
Patient ID) are entered, the following message is displayed: Are you sure you
want to discharge this patient? Selecting Yes will move the patient to
the discharge list. The YES button discharges the patient. The NO button
continues monitoring the patient.
b. If at least two of the three required demographic fields are not completed, the
following message is displayed: The patient’s data and submitted print jobs
will be deleted because at least two of the following fields, First
Name, Last Name or ID have not been filled in. Do you still want to
proceed with the discharge? The YES button discharges the patient. The NO
button continues monitoring the patient.
To discharge a patient from a bedside monitor:
1. Select the DISCHARGE button on the front of the bedside monitor.
2. Select a discharge option.
•The Discharge From Monitor option erases all patient information at the bedside
monitor.
•The Discharge From Central option erases all patient information at the Panorama
Central Station. If two of the three demographic fields (First Name, Last Name, and ID)
have been completed prior to the patient’s discharge, the patient is moved to the
Discharge list at the Panorama Central Station and may be retrieved.
•The Discharge From Both option erases all patient information at the Panorama
Central Station and at the bedside monitor.
NOTE: If a patient is discharged from the Central Station but not
from the patient monitor, the Central Station tile will not be
available for a new patient until a discharge has been
performed at the patient monitor.
3. Verify the selection. The Are you sure? confirmation dialog box is displayed.
•The Yes selection confirms the patient discharge.
•The No selection discard the patient discharge.
For additional information regarding discharging a patient, refer to "Discharging a Patient’’
on page 5-27.
2.4.4 Display
The Display Tab controls the order of patient data tiles and the waveforms that are shown on
the main screen.
To change order of the Display on main screen at Panorama Central Station:
1. Select the Patient Setup menu button.
2. Choose a patient tile by selecting its digital data or waveform area.
3. Select the Display tab.
4. Select a digital parameter tile to change a digital parameter. Select a waveform tile to
change a waveform.
5. Select a parameter from the Parameter list.