User's Manual

Displays Specifications
15 - 18 0070-00-0575-50 Panorama™ Operating Instructions
15.7 Displays
15.7.1 21" CRT Display
This is an integrated monitor that includes an internal touch screen controller and has the
following features:
•SXGA
1280 x 1024 dpi capability
0.27mm dot pitch
19" viewable image measured diagonally
15.7.2 20" CRT Display
This is an integrated monitor that includes an internal touch screen controller and has the
following features:
•SXGA
1280 x 1024 dpi capability
0.27mm dot pitch
18.9" viewable image measured diagonally
15.7.3 18.1" Flat Panel
This is an integrated monitor that includes an internal touch screen controller and has the
following features:
•SXGA
1280 x 1024 dpi capability
0.28mm dot pitch
18.1" viewable image measured diagonally
WARNING: The 18.1" flat panel may tip over, if the display head is
inclined to an angle greater than 45° backward tilt. If the
user elects to have the display head inclined to an angle
greater than 45° backward tilt, the flat panel must be
attached to a secure mounting surface via three screw
locations on the bottom of the base.
15.7.4 Touch Screen
A Surface Acoustical Wave (SAW) touch screen is supported as the standard input device
on 18" flat panel and 20" or 21" display.
The touch screen operates independent of a mouse interface.
The actual touch screen and its controller are integrated into the display.
The touch screen communication is accepted by Panorama Central Station via a serial
port.
Use of the touch screen does not preclude the use of a mouse.