User's Manual

Supported Devices System Overview
1 - 10 0070-00-0575-50 Panorama™ Operating Instructions
Additional Information
For additional information regarding Passport 2
®
bedside monitors, refer to the Passport 2
Operating Instructions.
For information regarding the parameters that can be monitored by the Passport 2, refer to
‘‘Parameter Specifications’’ on page 13-1.
1.2.6 Network Printer
The Panorama Central Station is capable of supporting two network printers at any given
time.
The following network printers are approved for use with the Panorama Central Station:
• HP4050N
• HP4100N
• HP4200N
Additional Information
For information regarding the setup and configuration of a printer with the Panorama Central
Station, refer to the Panorama Printer Configuration Manual (P/N 0070-00-0561).
INSP/ET ENF Gas Module is installed, gas sensor is attached
and the Agent ID is ENF.
Agent ENF Inspired
Agent ENF End Tidal
INSP/ET DES Gas Module is installed, gas sensor is attached
and the Agent ID is DES.
Agent DES Inspired
Agent DES End Tidal
INSP/ET SEV Gas Module is installed, gas sensor is attached
and the Agent ID is SEV.
Agent SEV Inspired
Agent SEV End Tidal
INSP/ET HAL Gas Module is installed, gas sensor is attached
and the Agent ID is HAL.
Agent HAL Inspired
Agent HAL End Tidal
NIBP (Systolic,
Diastolic, Mean,
Elapsed Time)
NIBP cable attached Low NIBP Systolic
High NIBP Systolic
Low NIBP Diastolic
High NIBP Diastolic
Low NIBP Mean
High NIBP Mean
Temp 1 Temperature sensor is attached. Low Temperature 1
High Temperature 1
Parameters/Waveforms (Continued)
PARAMETERS SETTINGS
PANORAMA
ALARMS