User's Manual

Panorama™ Operating Instructions 0070-00-0575-50 12 - 27
Troubleshooting Messages and Issues
12.1.37 Wireless Tab
This section lists some of the potential messages and issues that may occur while using the
Wireless tab.
MESSAGE/ISSUE * REASON SOLUTION
The System Setup menu
button is disabled.
The System Setup function is
already open on a Panorama
display and cannot be opened
on multiple displays.
Close the System Setup
function on the Panorama
display on which it is opened.
You must enter all fields
to program the wireless
device
All of the fields in the
Wireless tab were not
completed before the
Program button was pressed.
Select the OK button to close
the error message dialog box.
Complete all of the fields in the
Wireless tab before selecting
the Program button.
Program Failure: Unable
to obtain a channel
A channel was not obtained
from the wireless network.
Select the OK button to close
the error message dialog box.
Obtain a channel from the
wireless network.
Program Failure: Invalid
Data
The wireless device was not
successfully programed.
Select the OK button to close
the error message dialog box.
Recheck the accuracy of the
data to be entered in the
wireless device.
Warning: Attached device
is already programmed
with a channel. Allocated
channel will be lost if not
freed first. Do you want
to continue
The connected device has
already been programmed and
allocated with a channel.
Select the OK button to close
the error message dialog box.
• Select the YES button to
discard the previously
allocated channel and try
to obtain a new channel.
• Select the NO button to
keep the previously
obtained channel.
Program Failure: Unable
to obtain a channel.
The system tried to obtain a
channel from the Panorama
Central Station but was
unsuccessful.
Select the OK button to close
the error message dialog box.
Free up any unused channels.
Try again to obtain a channel
from the system. The system
administrator can also
purchase additional channels.
Network Error: Unable to
obtain device list.
The system requested a device
list from the wireless network
but did not receive one within
the allocated request time.
Select the OK button to close
the error message dialog box.
Request a device list from the
wireless network again.
There are no devices
available
An empty device list was
received from the wireless
network.
Select the OK button to close
the error message dialog box.
Enter the device in the
Panorama Equipment list.
* Messages are shown in all bold text.