User's Manual

Messages and Issues Troubleshooting
12 - 24 0070-00-0575-50 Panoramaâ„¢ Operating Instructions
This section lists some of the potential messages and issues that may occur while using the
Graphic View of the Trends tab.
No more events found
(Next Event Button)
There is no event data in the
Trend database.
Wait until an event is recorded to the
Trend database.
None of the rows that are
above the currently
highlighted row contain a
parameter with an event
condition.
Select the OK button to close the
message box and return to the List
view of the Trends tab.
The first row in the list is
already highlighted.
Select the OK button to close the
message box and return to the List
view of the Trends tab.
The Graphic, Print
More and Print Current
sidebar buttons are
disabled.
There is no data in the Trend
database because the
Trends tab was selected
before the first interval was
reached or before the first
NIBP measurement occurred.
Wait until the first interval is reached
or until the first NIBP measurement
occurs.
A patient has not been
admitted to the selected tile.
Admit a patient to the selected tile or
choose a tile that already has an
admitted patient.
The Print Selection dialog
box is open.
Close the Print Selection dialog
box.
MESSAGE/ISSUE * REASON SOLUTION
There is no trend data in
the display.
A patient has not been
admitted to the selected tile.
Admit a patient to the selected tile or
choose a tile that already has an
admitted patient.
The Trends tab was selected
before the first interval was
reached or before the first
NIBP measurement occurred.
Wait until the first interval is reached
or until the first NIBP measurement
occurs.
The parameter areas only
display the parameter
label and/or the unit of
measurement.
There is no data at the
location of the cursor line.
Move the cursor line to a point on
the time line where data is known to
exist.
No more data found
(Page Left Button)
There is no data in the Trend
database because the
Trends tab was selected
before the first interval was
reached or before the first
NIBP measurement occurred.
Wait until the first interval is reached
or until the first NIBP measurement
occurs.
The first recorded data has
been reached. No further
data exists before this time.
Select the OK button to close the
message box and return to the
Graphic view of the Trends tab.
* Messages are shown in all bold text.
MESSAGE/ISSUE * REASON SOLUTION
* Messages are shown in all bold text.