User's Manual

Messages and Issues Troubleshooting
12 - 10 0070-00-0575-50 Panorama™ Operating Instructions
12.1.13 Events Tab
This section lists some of the potential messages and issues that may occur while using the List
View of the Events tab.
System Setup menu button is
disabled.
The System Setup function is
already open on a Panorama
display and cannot be opened
on multiple displays.
Close the System Setup
function on the Panorama
display on which it is opened.
Cannot delete a device
connected to a patient
The device that you are trying
to delete is currently connected
to a patient.
Select the OK button to close
the dialog box. Disconnect the
patient from the selected
device before it can be
deleted.
The Tile button, Type button
and Device ID field are
disabled.
The equipment that was
selected to be edited is
currently monitoring a patient.
This equipment cannot be
edited until a patient discharge
is performed.
MESSAGE/ISSUE * REASON SOLUTION
* Messages are shown in all bold text.
MESSAGE/ISSUE * REASON SOLUTION
Sidebar buttons disabled
when Events tab
selected.
Patient tile not selected. Select a patient tile.
There is no patient admitted to
the selected tile.
Admit a patient to the tile.
No patient in the tile There is no patient admitted to
the selected tile.
Admit a patient to the tile.
Patient tile not selected. Select a patient tile.
Events list displays no
data.
Patient tile not selected. Select a patient tile.
None of the existing event
data meets the criteria of the
current event filter.
Change the event filter.
There is no patient admitted to
the selected tile.
Admit a patient to the tile.
Events list column headers
not displayed.
Patient tile not selected. Select a patient tile.
There is no patient admitted to
the selected tile.
Admit a patient to the tile.
This item cannot be
deleted.
Specific types of events
cannot be removed from the
Event list.
Refer to ‘‘Alarms and Events’’ on
page 14-1.
Please select a print
interval
A print interval was not
selected in the Print Selection
dialog box.
Select a print interval, then select the
Print button.
* Messages are shown in all bold text.