User's Manual

Button Indicators Telepack (Optional)
10 - 4 0070-00-0575-50 Panorama™ Operating Instructions
10.2.3 LEAD SELECT Button (Telepack-608 only)
Currently, the functionality for the ECG LEAD SELECT is unavailable. When functioning,
pressing the ECG LEAD SELECT button will cause the following to occur:
• The active Lead for a 3-Lead ECG Lead select will change
• The ECG LED that is active will turn on for 2 seconds
10.2.4 Test/CHECK Button
Press the Test/CHECK button to verify LED indicator lights are functioning, ECG Lead
connection, link status and battery status.
For information on interpreting the status of the ECG Lead, Link Status and Battery Status LED
indicator lights, refer to the following sections: “ECG Lead Diagram LED Indicator Lights” on
page 10-5, “Link Status LED Indicator Light” on page 10-7, and “Battery Status LED Indicator
Light” on page 10-7.
10.2.5 RECORD Button
Press the RECORD button to remotely print the “All Strips Report” at the Panorama Central
Station.