User's Manual

Unit Priorities Tab System Setup Functions
9 - 38 0070-00-0575-50 Panorama™ Operating Instructions
3. Select the Select button. The selected parameter is assigned its new unit priority position
and will be shown in the box on the right of the selected unit priority.
4. Select the Done button. All priority changes in the Unit Priorities tab have now been
confirmed. The changes that were made will only be applied to newly admitted patients
and will not affect patients currently being monitored.
9.13.3 Sidebar Button - Normal Screen
Select the Normal Screen sidebar button to return the display to the full screen mode, close
all tabs, message boxes and dialog boxes.
9.13.4 Troubleshooting
This section lists some of the potential messages and issues that may occur Unit Priorities
tab.
MESSAGE/ISSUE * REASON SOLUTION
Please select a parameter
button before selecting
from the list
This message appears when
Select button is pressed before
a Unit Priority button is
selected.
Select the OK button to close
the dialog box. Select a Unit
Priority button.
The System Setup menu
button is disabled.
The System Setup function is
already open on a Panorama
display and cannot be opened
on multiple displays.
Close the System Setup
function on the Panorama
display on which it is opened.
* Messages are shown in all bold text.