User's Manual

Panorama™ Operating Instructions 0070-00-0575-50 9 - 33
System Setup Functions Print Setup Tab (System)
• A check mark in a printer’s check box button indicates that if the printer has been
properly configured with the Panorama Central Station it will be capable of printing
Panorama reports.
• An empty check box button indicates the printer is not selected and will not print
reports.
2. Select the printer’s check box button to enable/disable the printing of strips. The print
setup settings are changed instantly.
• A check mark in a printer’s check box button indicates that if the printer has been
properly configured with the Panorama Central Station it will be capable of printing
waveform strips.
• An empty check box button indicates the printer is not selected and will not print
waveform strips.
9.11.3 Strip Setup Sidebar Button
Select the Strip Setup sidebar button to select the default parameters that will be printed in
the All Strips Report.
1. Select the Strip Setup sidebar button in the Print Setup tab. The contents of the Print
Setup tab (FIGURE 9-14) display the waveform strips that can be printed in the All
Strips, the Event Zoom In and the Full Disclosure Zoom In reports.
FIGURE 9-14 Print Setup tab
2. Select the waveform check box button to enable/disable the printing of waveforms in
reports. The print setup settings are changed instantaneously.
• A check mark in a waveform’s check box button indicates the waveform is selected to
print in reports when that parameter is in use.
• An empty check box button indicates the waveform is not selected and will not print in
reports.
For information on customizing the waveform strips printed for a particular patient, refer to
the ‘‘Print Setup Tab (Patient)’’ on page 5-39.
View Print Setup Sidebar Button
Select the View Print Setup sidebar button to return the Print Setup tab to display the
printer selections.