User's Manual

Print Setup Tab (System) System Setup Functions
9 - 32 0070-00-0575-50 Panorama™ Operating Instructions
9.11 Print Setup Tab (System)
The Print Setup tab (FIGURE 9-13) defines the printers to be used by the Panorama Central
Station. The system is capable of communicating with two network printers simultaneously.
The Print Setup tab selects the default waveforms printed in the All Strip, Event Zoom-In
and Full Disclosure Zoom-In reports.
NOTE: The network printer(s) must be properly configured to
communicate with the Panorama Central Station.
This section includes the following:
• Accessing the Print Setup Tab
• Setting the System Default Print Setup
• Sidebar Button - Normal Screen
• Troubleshooting
For additional information on printer configuration see the Panorama Printer Configuration
guide (P/N 0070-00-0561).
9.11.1 Accessing the Print Setup Tab
1. From the menu bar, select the System Setup button. The first set of System Setup tabs
is displayed.
2. Select the Installation Setup tab. The Installation Setup tab is displayed.
3. Enter the correct System password. The next set of System Setup tabs is displayed.
4. Select the More tab. The next set of System Setup tabs is displayed.
5. Select the Print Setup tab.
FIGURE 9-13 Print Setup Tab (System)
9.11.2 Setting the System Default Print Setup
This section outlines setting defaults for the Print Setup tab. To set system default settings,
follow these steps:
1. Select the printer’s check box button to enable/disable the printing of reports. The
options available include Laser jet 1 and Laser jet 2. Print setup settings are changed
instantaneously.