User's Manual

Panorama™ Operating Instructions 0070-00-0575-50 9 - 29
System Setup Functions Date/Time Tab
• Select the Close button to discard the entry in the dialog box and return to the Date/
Time tab. The Min. field will remain unchanged until the Done button is pressed.
5. Select the AM/PM toggle button to select either AM or PM.
NOTE: The AM/PM button is only available if the current time
format is in 12 hour mode.
6. Select the Time button to select the desired time format.
The time formats available include HH:MM (12H), HH:MM:SS (12H) (default), HH:MM
(24H) and HH:MM:SS (24H).
NOTE: Whenever the Panorama Central Station is set to a
language other than English the Panorama Central Station
will be in the 24-hour time format.
7. Select the DONE button to change the format of the system time.
The Are you sure you want to change the date/time settings dialog box
appears.
8. Select the Yes or No button in the dialog box.
• Select the Yes button to change the system time format.
• Select the No button to discard the changes that were made to the system time format.
9.8.3 Sidebar Button - Normal Screen
Select the Normal Screen sidebar button to return the display to the full screen mode, close
all tabs, message boxes and dialog boxes.
9.8.4 Troubleshooting
This section lists some of the potential messages and issues that may occur while using the
Date Time tab.
MESSAGE/ISSUE * REASON SOLUTION
The System Setup menu
button is disabled.
The System Setup function is
already open on a Panorama
display and cannot be opened
on multiple displays.
Close the System Setup
function on the Panorama
display on which it is opened.
* Messages are shown in all bold text.