User's Manual

Panorama™ Operating Instructions 0070-00-0575-50 9 - 23
System Setup Functions Equipment Setup Tab
Select the Done button to accept the selection or the Cancel button to discard the
selection.
The device type is displayed in the Type field.
4. Select the Label text box to enter a label for the new equipment.
5. Use the keyboard dialog box to enter the device label for the new equipment. A device
label must be entered in the equipment list and can only use alphanumeric characters
and underscores ( _ ). There is a maximum of 14 characters.
6. Accept or reject the text entered in the keyboard dialog box. For additional information
about using the keyboard dialog box, refer to ‘‘Keyboard Dialog Box’’ on page 2-12.
NOTE: All Device Labels in the Equipment List must be unique and
cannot be duplicated.
7. Select the Device ID text box.
8. Use the keyboard dialog box to enter the device identification number for the new
equipment. A Device ID must be entered in the equipment list for Passport 2, Telepack,
Spectrum™ and Panorama Server devices (maximum of 8 characters). For information
on the Device ID format, refer to ‘‘Device ID Format’’ on page 9-22.
NOTE: All Device IDs in the Equipment List must be unique and
cannot be duplicated.
NOTE: The Device ID field will display a dash (-) and be disabled if
the type of equipment being entered is a Panorama Central
Station.
9. Accept or reject the text entered in the keyboard dialog box. For additional information
about using the keyboard dialog box, refer to ‘‘Keyboard Dialog Box’’ on page 2-12.
Select the Done button.
The equipment is added to the Equipment List.
9.7.3 Modifying Equipment included in the Equipment List
This section outlines modifying equipment added to the Panorama Central Station Equipment
List.
1. Select the monitoring device to be modified in the equipment list box. A monitoring
device has been selected when it changes from white text on a black background to
black text on a white background.
2. Select the Edit button under the Equipment list box. The Device Setup Area is displayed.
3. Select the area in the Device Setup to be modified. For information on modifying the
areas of the Device Setup area, refer to ‘‘Entering New Equipment’’ on page 9-22.
NOTE: The Label text field is the only field that can be modified for
a monitoring device currently monitoring a patient.
4. Select the Done button. The equipment is added to the Equipment List.
9.7.4 Deleting Equipment in the Equipment List
This section outlines deleting equipment from the Panorama Central Station Equipment List.
1. Select the monitoring device to be deleted from the equipment list box.
A monitoring device has been selected when it changes from white text on a black
background to black text on a white background.