User's Manual

Panorama™ Operating Instructions 0070-00-0575-50 9 - 19
System Setup Functions Passwords Tab
9.6 Passwords Tab
The system Passwords tab (FIGURE 9-8) establishes and modifies the passwords used to
access the System Setup and Patient Alarm Setup areas of the Panorama Central
Station.
This section includes the following:
• Accessing the Installation Setup Tab
• Modifying an Alarm Password
• Sidebar Button - Normal Screen
• Troubleshooting
9.6.1 Accessing the Installation Setup Tab
1. From the menu bar, select the System Setup button. The first set of System Setup
tabs is displayed.
2. Select the Installation Setup tab. The Installation Setup tab is displayed.
3. Enter the correct System password. The next set of System Setup tabs is displayed.
4. Select the Passwords tab.
FIGURE 9-8 Passwords Tab
9.6.2 Modifying an Alarm Password
The Passwords tab changes the password that gains access to the Patient Alarms section
of the Panorama Central Station.
1. Select either the Alarm or the System button. The Old Password text box is
displayed.
2. Select the Old Password text box. The keyboard dialog box is displayed.
3. Using the keyboard dialog box, enter the alarm password that was previously
established in ‘‘Recording Password Changes’’ on page 9-20. The Alarm/System
password is case sensitive and has a maximum 15 characters.
4. Accept or reject the text entered in the keyboard dialog box. For additional information
about using the keyboard dialog box, refer to ‘‘Keyboard Dialog Box’’ on page 2-12.
NOTE: The factory default Alarm password is ‘alarm’. The factory
default System password is ‘system’.