User's Manual

Panorama™ Operating Instructions 0070-00-0575-50 9 - 15
System Setup Functions System Alarms Tab
NOTE: Changes to the system Alarm Limit settings will only apply
to newly admitted patients when the Bedside Alarm
Tracking option is set to OFF.
2. Use the scroll bars in the System Alarms (Alarm Limits) tab to select the slider control
for the alarm limit to be set or modified. Each page can show a maximum of six and a
minimum of one slider controls on each screen.
• Double arrow scroll bar buttons will display the next/previous page of parameter
slider controls each time the button is pressed (until the first/last page is reached).
• Single arrow scroll bar buttons will display the next/previous slider control each time
the button is pressed (until the last control is shown).
3. Manually set the alarm limits for the selected parameter.
To set a high alarm limit:
• Select the upper alarm limit button to the left of the parameters slider bar. This button is
either labeled with the word OFF or with the high alarm limit setting.
• To set an upper alarm limit you can either Select the up/down arrow buttons on the
parameter’s vertical scroll bar or you can drag and drop the scroll box in the scroll
bar.
To set a low alarm limit:
• Select the lower alarm limit button to the left of the parameters slider bar. This button is
either labeled with the word OFF or with the low alarm limit setting.
• To set a lower alarm limit you can either select the up/down arrow buttons on the
parameter’s vertical scroll bar or you can drag and drop the scroll box in the scroll
bar.
For information on the preset alarm limit ranges, refer to the ‘‘System Alarms Tab’’ on
page 9-11.
9.5.2.3 Sidebar Buttons
The following sidebar buttons are used to expand the functionality of this tab.
System Alarm Options
Select the System Alarm Options sidebar button to display the System Alarm
Options tab. For additional information regarding System Alarm Options, refer to the
‘‘System Alarms Tab’’ on page 9-11.
System Alarm Responses
Select the System Alarm Responses sidebar button to display the System Alarm
Responses tab. For additional information regarding System Alarm Responses, refer to the
‘‘System Alarms Tab’’ on page 9-11.
Print
Select the Print sidebar button to print the System Alarm Report. The System Alarm Report
will produce a printout of the default system alarm settings.
To print the system’s default alarm limit settings, select the Print button.
For additional information on the System Alarm Report, see ‘‘Additional Reports’’ on page
8-36.