User's Manual

Panorama™ Operating Instructions 0070-00-0575-50 9 - 13
System Setup Functions System Alarms Tab
7. Select the Bedside Alarm Tracking toggle button to either enable or disable the
ability to track alarms at the bedside monitor. Bedside Alarm Tracking options
include ON and OFF. The factory default setting is ON. Bedside Alarm tracking will
automatically track alarm limit settings from the bedside monitor to the Panorama
Central Station and from the Panorama Central Station to the bedside monitor when it is
enabled.
•The ON option indicates that Bedside Alarm Tracking will be enabled.
•The OFF options indicates that Bedside Alarm Tracking will not be enabled.
NOTE: Changes to the Bedside Alarm Tracking option will affect all
patients within 10 seconds.
8. Select the Suspend Level 1 toggle button to either enable or disable the ability to
suspend level 1 alarms. Suspend Level 1 options include ON and OFF. The factory
default setting is ON.
•The ON option indicates that the Suspend All Alarms function will be accessible in
the Patient Alarms tabs.
•The OFF option indicates that the Suspend All Alarms function will not be
accessible in a Patient Alarms tab.
NOTE: Changes to the Suspend Level 1 option will affect all
patients upon entering the Patient Alarms tab.
9. Select the ST Alarm Delay button to set an alarm delay for ST alarms. ST alarm
delay is the period of time that the Panorama Central Station will wait before ST alarm
notification. ST Alarm Delay options include 30 seconds, 45 seconds, 1 minute, 90
seconds, 2 minutes and 3 minutes. The factory default setting is 30 seconds.
NOTE: Changing the ST Alarm Delay option will affect all new ST
alarms.
10. Select the Alarm Delay button to set an alarm delay for the Panorama Central Station.
The alarm delay is the period of time that the Panorama Central Station will wait before
alarm notification. Alarm Delay options include None, 1 second, 2 seconds, 3 seconds,
4 seconds, 5 seconds, 6 seconds, 7 seconds and 8 seconds. The factory default setting
is None.
NOTE: Changing the Alarm Delay option will only affect new
alarms.
9.5.1.3 Sidebar Buttons
The following sidebar buttons are used to expand the functionality of this tab.
System Alarm Limits
Select the System Alarm Limits sidebar button to display the System Alarm Limits
tab. For information regarding system Alarm Limits, refer to ‘‘System Alarms (Alarm Limits)
Tab’’ on page 9-14.
System Alarm Responses
Select the System Alarm Responses sidebar button to display the System Alarm
Responses tab. For information regarding System Alarm Responses, refer to ‘‘Accessing
the System Alarms (Alarm Responses) Tab’’ on page 9-16.