User's Manual

Panorama™ Operating Instructions 0070-00-0575-50 9 - 9
System Setup Functions Volume Tab
9.4.2 Setting Volume Levels
Setting a Touch Click Volume Level
The Touch Click volume setting determines the volume of the sound associated with each
touch of the Panorama display.
Characteristics of the Touch Click volume setting include the following:
• A volume level range of “0 - 10 Maximum”
• A factory default setting of 5
• Can be turned OFF
NOTE: Adjustments to the Touch click volume setting will take effect
immediately.
• Use the volume control scroll bar to select the desired Touch Click volume level.
Touch the arrows on the screen or use the mouse to move the box within the scroll bar to
the desired Touch Click volume level.
Setting a System Alarms Volume Level
The System Alarms volume setting determines the volume of the sound associated with the
Panorama Central Station alarm settings.
Characteristics of the System Alarms volume setting include the following:
• A volume level range of “Minimum - 10 Maximum”
• A factory default setting of 3
• Cannot be turned OFF
NOTE: Adjustments to the System Alarms volume setting will take
effect immediately.
• Use the volume control scroll bar to select the desired System Alarms volume level.
Select the arrows on the screen or use the mouse to move the box within the scroll bar to
the desired System Alarms volume level.
Setting a Physiological Alarms Volume Level
The Physiological Alarm volume setting is a system setting that applies to enabled numeric
and arrhythmia alarm violations. The Panorama Central Station allows for up to three time
specified volume settings for physiological alarms. This feature allows for the varying of
volume settings for physiological alarms based on the time of day.
Characteristics of the Physiological Alarm volume setting include the following: