User's Manual

Panorama™ Operating Instructions 0070-00-0575-50 8 - 53
Report Functions Additional Reports
8.4.8 Troubleshooting
This section lists some of the potential messages and issues that may occur while trying to
print an additional report.
MESSAGE/ISSUE * REASON SOLUTION
The Print sidebar button is
disabled.
A patient is not currently
selected.
Select a patient before trying to
print a report.
The Please select a Print
Interval error message is
displayed.
This message appears in the
Patient Reports tab when
the Print button is pressed
before a time interval is
selected in the Full Disclosure,
Event, or Trend reports.
Select the OK button to close
the dialog box. Select a print
interval in the available dialog
box.
The report will not print There are several reasons that
would cause a report not to
print. It could be a problem
with the communication
between the printer and the
Panorama Central Station or
simply a problem with the
printer.
If there is an error that appears
such as Printer out of
Paper you will need to
remedy that situation.
If the No Printer connected
or Printer not Available
error is displayed check that
the printer was properly
configured with the Panorama
Central Station. See the Printer
Configuration manual (P/N
0070-00-0561).
* Messages are shown in all bold text.